Happy Anniversary Plaque Cake Stencil Set by Designer Stencils

Celebrate your special anniversary with a playful touch using our Happy Anniversary Plaque Cake Stencil Set! With a plaque size of 5.5 inches wide by 4.0625 inches high, you can easily create a colorful and unique design and add your own fun message using the included lettering and numbers. Whether you choose to air brush or brush with powders, this stencil set allows for endless creative possibilities. So go ahead, make your cake stand out and mark the occasion with our Happy Anniversary Plaque Cake Stencil Set! 

Step-By-Step Usage (see photos to follow along):

1. Roll out fondant
2. Use a background stencil to airbrush on a design - stencil used in photo: Chevron Cake Stencil Side
3. Using stencil cutout piece, cut shape out of fondant
4. Trowel lettering with royal icing and sprinkled red sparkle dust; carefully remove stencil and let dry
5. Trowel thick amount of icing over the numbers onto wax paper
6. After lifting the stencil, shake the paper so the edges of the icing round down
7. While the icing is still wet, sprinkle sparkle dust to cover
8. When the numbers dry, gently lift them off and position onto plaque

Sizing/Details:

• Plaque Size: 5 1/2" h x 4 1/8" w
• Number Height: 1" h
• Stencil Includes Numbers 0 through 9, "Happy Anniversary" Plaque Piece and Plaque Shaped Cutout

Custom Cake Stencils:

• Contact us today or start a chat conversation with us if you need this in a different sizes, or need it customized in any way.
• Please contact us using our Request for a Quote form if you have a design you need turned into a stencil for your cake.

Stencil Highlights:

• 10 mil food-grade Mylar (greater durability than standard acetate)
• Works with buttercream, fondant, airbrushing, powdered sugar, etc.
• Can be repeated along the perimeter of any cake.
• Works on round, square or rectangular cakes
• Design can be used vertically or horizontally
• Made in the USA

Tips on Stenciling the Side of a Cake With Buttercream or Royal Icing:

• Make sure iced cake is completely dry. You can either let dry overnight, or put in fridge or freezer for about 30 minutes.
• Pin cake stencil to the side of your cake, making sure that all parts are completely flat against surface. Make sure the stencil is level on the cake.
• Apply a creamy consistency of icing using an rubber or offset spatula to spread a generous amount of royal icing over stencil, being sure to cover all the holes on the stencil.
• Using a cake smoother or the back of an icing spatula, remove the excess icing from the stencil. Be careful not to remove too much of the icing, you want about 2 mm of royal icing to remain on the cake so as to ensure that the pattern comes out well (or at least the thickness of the stencil sheet itself.
• Gently remove the stencil from one side to the other (don't just pull it off, it may disturb the design).
• To repeat the design horizontally or vertically, Allow the icing to completely dry before using the stencil on the uncovered portions of the cake. Be sure to start from the point where the previous stencil pattern ended. Continue this process until all the cake sides have been covered.
• You also want the stencil to be cleaned off completely between stenciling so that the openings are free of dried icing. 
• Once that is dry, feel free to airbrush on top of this, or embellish with luster dust, candies, drips just to name a few.